Noyafa Network Cable Tester Wire Tracer Set with Anti-jamming Porbe, Continuity Crimp Length PoE Port Blink Test NF-8209S
Locate The Target Cable Quickly - Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments.
Ethernet Continuity Test - Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
Measure Cable Length Accurately - Measure the network cable in the range of 2.5m-500m.
Port Blink Test - Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
PoE Testing - Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard)
Work Safely - Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
Rechargeable Battery- The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power
Other Function - Quality control of the crimping crystal
Certification - Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
100% Affordable - Manufactured in China and a lot cheaper than competitor products with similar quality. Like Fluke
- Technical Index
|Transmitter||Wiremap||Cable type||CAT5、CAT6 (STP & UTP)|
|Test with switch directly||Yes|
|Crimping||Identify response speed||≤ 1second|
|Test type||8 cores|
|Min. recognition length||10cm|
|Length||Cable type||CAT5、CAT6 (STP & UTP)|
|Scan||Cable type||CAT5、CAT6 (STP & UTP)|
|Max. signal voltage||5V+/-1.0V p-p(audio file)|
|Dual mode to scan cable||AC filter & Non AC filter|
|Max range||600m (RJ45)/ 400m(RJ11)|
|POE||Test range||DC 5~60V standard / non-standard PoE switch|
|Power supply core/Jumper method||End jumper/middle jumper/8-pin power supply/unknown|
|PSE type||IEEE 802.3af/at,Non-standard|
|Port flash /Link test||Full-duplex/half-duplex recognition||Yes|
|LCD display||128*64 Dot-matrix with backlight|
|Power supply||3.7v 1400mAh lithium battery|
|Voltage protection||DC48V 5mA|
|Max working current||<150mA|
|NCV||AC 70V~1000V 50/60Hz|
|Battary type||3.7v 1400mAh lithium battery|
|Max working current||<280mA|
|Other functions||Low pressure tips||3.5v+/-0.1v|
|Low power automatic shutdown||150min/30min/60min/OFF|
|Charging method||DC 5V 1A Type-C|
|Operating temperature/humidity||32~122°F (0~50°C）/90% non-condensing|
|Storage temperature||14~122°F (-10~50°C）|
A1: We're original manufacturer, which can help you get factory selling products with competitive prices.
Q2: How long is your delivery time?
A2: Normally it is 3-10 working days if the goods are in stock. Or it is 10-25 working days if the goods are not in stock, it is according to your order quantity.
Q3: How is your after-sale service?
A3: Our experienced technical team is ready to respond you within 24 hours.
Q4: What is your MOQ? Do you provide customized services?
A4: For sample order, there is no limit on MOQ. We will appreciate it if you'd like to purchase samples for testing first.
Q5: What is your terms of payment?
A5: Payment≤5000USD, 100% in advance. Payment>5000USD, 30% T/T in advance, balance before shipment. Trade Assurance order payment. Paypal, Western Union etc.
Q6: Can I become your sole distributor in my place?
A6: We appreciate that. And we will discuss about your market situation together and after confirmation we will send you a contract with detail requirements about distributor terms and sales targets.