ru
es
de
Noyafa's New Circuit Tracer & Breaker Finder with Integral GFCI Outlet Tester, Network Cable Finder, NCV Detector - NF825TMR
Follow The Path Of A Circuit - The NF-825 circuit detector tracer will give you a clear indication of where power cords are inside a wall and/or in which direction they run. The circuit can be energized (live) or de-energized (open).
Find Cable Fault Location - Find the location of interruptions and short circuits in cables and electrical lines.
Find Circuit Breaker - Connect GFCI Tester to a power outlet in the particular circuit, receiver can be scan the panel to locate the correct breaker.
Electrical outlet Test - GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. (suitable with AC90V-250V 50/60Hz)
Network Cable Tracer - You can locate and identify the direction of a network cable by plugging it into emitter and use the receiver for tracing.
NCV Induction Pen - Power pen detects whether any device or location has power. It is suitable for non-contact detection of voltage and testing.
Adjustable Search Sensitivity - Adjust the receiver's sensitivity to 6 different levels, which can help you easily detect wires buried in the ground or deep in walls.
Signal Display Lights - Circuit finder features 3 signal display lights to determine the strength of a signal from the transmitter. They can make your search faster and more precise.
LED Lights - The receiver has LED lighting to help you get the job done, even in low-light environments.
Certification - Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
100% Affordable - Manufactured in China and a lot cheaper than competitor products with similar quality. Like Klein.
Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
Find Cable Fault Location - Find the location of interruptions and short circuits in cables and electrical lines.
Find Circuit Breaker - Connect GFCI Tester to a power outlet in the particular circuit, receiver can be scan the panel to locate the correct breaker.
Electrical outlet Test - GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. (suitable with AC90V-250V 50/60Hz)
Network Cable Tracer - You can locate and identify the direction of a network cable by plugging it into emitter and use the receiver for tracing.
NCV Induction Pen - Power pen detects whether any device or location has power. It is suitable for non-contact detection of voltage and testing.
Adjustable Search Sensitivity - Adjust the receiver's sensitivity to 6 different levels, which can help you easily detect wires buried in the ground or deep in walls.
Signal Display Lights - Circuit finder features 3 signal display lights to determine the strength of a signal from the transmitter. They can make your search faster and more precise.
LED Lights - The receiver has LED lighting to help you get the job done, even in low-light environments.
Certification - Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
100% Affordable - Manufactured in China and a lot cheaper than competitor products with similar quality. Like Klein.
Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
for Wholesale Purchase
- Videos
- Description
- Technical Index
- Packaging
- FAQ
- Manual
video
Description
Enable GingerCannot connect to Ginger Check your internet connectionor reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
Technical Index
| Model | NF-825TMR | |
| AC Seek Test | Cable Voltage | AC 90V ~ 120V |
| The Interface Type | Crocodile clip | |
| Emission Frequency | 157KHz | |
| Launch Distance | 200m | |
| Detection Distance | 0~0.5m | |
| Network Cable Hunting Test | Network Cable Type | CAT5/CAT6 |
| Network Cable Interface | RJ45 | |
| Emission Frequency | 455 KHz | |
| Launch Distance | 600m | |
| Circuit Breaker Lookup Test | Detection Distance | 2~3cm |
| Socket Wire Sequencing Test | Test Voltage | AC90V~120V 50/60Hz |
| NCV Tester | AC90V~1000V 50/60Hz | |
| LED Lighting | Yes | |
| Power Supply Mode | 7.4V 700mA lithium battery | |
| Charging Method | DC 5V 1A Type-C | |
| Operating Temperature | 32~122°F(0~50°C) | |
| Storage Temperature | 14~122°F(-10~50°C) | |
| Operating Humidity | ≤90%non-condensing | |
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
Packaging
Enable GingerCannot connect to Ginger Check your internet connectionor reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
FAQ
Q1: Is it normal for the transmitter to detect a slight current sound when the ear is close to the strong current function?
A1: It is normal, this is the sound emitted when the transformer is boosted, and it does not affect itsstandard function.Q2: How is the transmitter wired?
A2: The transmitter can use the three plugs and crocodile clip wires in the accessories, depending on the situation. The three plugs are connected to the red end transmitter marked with "+" at the end andthe black end transmitter marked with "-". The plug is inserted into the jack of the socket. The crocodile clip is also a red oneend launcher with “+" end, a black onelauncher has the "-" end, and the clip then clamps the zero and earth lines.Q3: How can the receiver find a strong current?
A3:The receiver probe moves along the general direction of the wall or buried line and when the signal is received, it will emit a sound. The stronger the signal, the louder is the sound which helps to determine the approximate position of the cable after setting the sensitivity adjustment knob.Q4: Are you trading company or manufacturer?
A4: We're original manufacturer, which can help you get factory selling products with competitive prices.Q5: How long is your delivery time?
A5: Normally it is 3-10 working days if the goods are in stock. Or it is 10-25 working days if the goods are not in stock, it is according to your order quantity.Q6: How is your after-sale service?
A6: Our experienced technical team is ready to respond you within 24 hours.Q7: What is your MOQ? Do you provide customized services?
A7: For sample order, there is no limit on MOQ. We will appreciate it if you'd like to purchase samples for testing first.Q8: What is your terms of payment?
A8: Payment≤5000USD, 100% in advance. Payment>5000USD, 30% T/T in advance, balance before shipment. Trade Assurance order payment. Paypal, Western Union etc.Q9: Can I become your sole distributor in my place?
A9: We appreciate that. And we will discuss about your market situation together and after confirmation we will send you a contract with detail requirements about distributor terms and sales targets.downloads